Henley Stoves Lisbon 700 Installation Instructions

To install the Henley Stoves Lisbon 700 Heater, ensure a qualified technician performs the installation according to the manufacturer's instructions. Position the heater in a well-ventilated area, with proper clearance from combustible materials. Secure the flue pipe and check for any leaks.
The Lisbon 700 Heater is designed to burn seasoned hardwood logs. Avoid using treated wood or materials that produce excessive creosote buildup.
Clean the Lisbon 700 Heater regularly, at least once a month during the heating season. Remove ash buildup, clean the glass, and inspect the flue for any obstructions.
Ensure the heater is using the correct fuel and that the air vents are open. Check for any blockages in the flue. If the problem persists, consult with a professional technician.
To improve efficiency, use well-seasoned hardwood, keep the air vents clean and unobstructed, and regularly maintain the stove according to the manufacturer's guidelines.
Maintain clearances from combustible materials, use a fireguard if necessary, and never leave the stove unattended while in operation. Regularly check smoke and carbon monoxide detectors.
Check the flue for obstructions, ensure proper ventilation, and confirm that the fuel is dry and seasoned. If smoke persists, consult a professional to inspect the system.
Regularly clean the ash pan and glass, inspect the seals, check the chimney for buildup, and schedule an annual professional service to ensure optimal performance.
Close the air vents to reduce oxygen flow and allow the fire to die down naturally. Never use water to extinguish the fire as it can damage the stove.
Immediately turn off the gas supply, ventilate the area, and contact a certified technician to inspect the appliance before further use.