Harley-Davidson Super Glide Custom 2005 Owner's Manual
![Harley-Davidson Super Glide Custom 2005 Motorcycle manual cover](/images/xzoiHiHvunpqvbHYFFwDfnXQ/thumbs/thumb175x175.webp)
To change the oil, warm up the engine, then place a drain pan under the oil pan. Remove the drain plug and allow the oil to fully drain. Replace the drain plug and remove the old oil filter. Install a new oil filter and add new oil through the oil fill port. Check the oil level and adjust as necessary.
For a 2005 Harley-Davidson Super Glide Custom, it's recommended to use a high-quality SAE 20W50 motorcycle oil, specifically designed for air-cooled V-Twin engines. Always refer to the owner's manual for the manufacturer's recommendations.
First, check the battery charge and connections. Ensure the kill switch is set to 'run' and the bike is in neutral. Inspect the fuses and starter relay. If the issue persists, the starter motor or ignition switch may need professional evaluation.
Backfiring can be caused by an incorrect fuel mixture, exhaust leaks, or ignition timing issues. Check for exhaust leaks, ensure the carburetor or fuel injection is properly tuned, and inspect the ignition system for any faults.
To adjust the clutch, locate the clutch cable adjuster and loosen the locknut. Turn the adjuster to achieve the desired free play in the clutch lever, usually about 1/16 to 1/8 inch. Tighten the locknut and verify the adjustment in different gears.
The recommended tire pressure is typically around 36 psi for the front tire and 40 psi for the rear tire. However, always check the tire sidewall and the owner's manual for the most accurate specifications for your motorcycle.
Regularly inspect the belt for signs of wear or damage, such as cracks or fraying. Ensure proper tension by following the guidelines in the service manual. Clean the belt and pulleys with a mild soap solution and rinse thoroughly. Avoid using any harsh chemicals.
If the engine overheats, stop riding and allow it to cool down. Check the oil level and quality, as low or old oil can cause overheating. Inspect the cooling fins for obstructions, and consider riding at a moderate speed to avoid overheating in the future.
Clean the chrome with a mild soap and water solution, and dry thoroughly. Use a chrome-specific polish to remove any tarnish or stains, following the product instructions. Apply a protective wax to help prevent future tarnishing.
Regular maintenance includes oil and filter changes, checking tire pressure and tread, inspecting the brakes, lubricating cables, checking the battery, and ensuring all lights and signals are functional. Refer to the service manual for a detailed maintenance schedule.