Harley-Davidson 1200 Custom 2016 Owner's Manual
![Harley-Davidson 1200 Custom 2016 Motorcycle manual cover](/images/fAoCdGwMgoWvadrEYasJuguV/thumbs/thumb175x175.webp)
The recommended tire pressure for the Harley-Davidson 1200 Custom 2016 is 30 psi for the front tire and 36 psi for the rear tire. Always check the tire pressure when the tires are cold.
It's recommended to change the oil every 5,000 miles or once a year, whichever comes first. Always use the oil type recommended in the owner's manual.
For optimal performance, use SAE 20W50 synthetic motorcycle oil that meets or exceeds API CI-4/CH-4/CG-4/CF-4/CF/SJ/SH/SG specification.
First, check the battery for charge and connections. Ensure the kill switch is in the 'Run' position. Inspect the spark plugs and fuel supply. If the issue persists, consult a professional mechanic.
The correct spark plug gap for the Harley-Davidson 1200 Custom 2016 is 0.038 to 0.043 inches. Always check the gap before installation.
To adjust the drive belt tension, place the motorcycle on a lift, loosen the rear axle nut, and use the adjuster bolts on each side of the swingarm to achieve the recommended belt tension of 3/8 to 5/8 inch deflection with 10 lbs of force.
At 10,000 miles, perform an oil change, inspect and adjust the drive belt, replace the air filter, inspect the brake pads and fluid, and check all fasteners for tightness.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid aggressive acceleration, and reduce idling time. Consider using high-quality fuel additives for better combustion.
If the engine overheats, safely pull over and turn off the engine. Allow it to cool down before checking the coolant level (if applicable) and oil level. Inspect for leaks or blockages. Seek professional help if needed.
To store your motorcycle for the winter, clean and wax it, change the oil, fill the fuel tank and add a stabilizer, charge the battery, and cover the motorcycle to protect it from dust and moisture.