Harley-Davidson Street Glide 2016 Owner's Manual

The recommended tire pressure for the Harley-Davidson Street Glide 2016 is 36 psi for the front tire and 40 psi for the rear tire.
It is recommended to change the oil every 5,000 miles or once a year, whichever comes first, for the 2016 Harley-Davidson Street Glide.
The recommended oil for a 2016 Harley-Davidson Street Glide is SAE 20W50 synthetic oil.
To adjust the suspension on a 2016 Harley-Davidson Street Glide, locate the rear shock absorbers and use the preload adjuster to increase or decrease the tension according to your riding preference.
To charge the battery, disconnect it from the motorcycle, connect it to a suitable motorcycle battery charger, and ensure the charger is set to the correct voltage (12V). Charge the battery until it reaches full capacity.
Start by checking the battery voltage and connections. Ensure the kill switch is in the 'run' position, and the bike is in neutral. If the issue persists, inspect the starter relay and the ignition switch.
To replace the air filter, remove the air cleaner cover by unscrewing the mounting bolts. Replace the old air filter with a new one, ensuring it is seated correctly, and then reattach the cover securely.
The fuel capacity of the 2016 Harley-Davidson Street Glide is approximately 6 gallons (22.7 liters).
To check the brake fluid level, locate the brake fluid reservoir on the handlebars. Look through the sight glass or remove the cap to ensure the fluid is at the appropriate level, as indicated by the markings.
Regular maintenance for a 2016 Harley-Davidson Street Glide includes oil and filter changes, checking the brake system, inspecting the drive belt for wear, checking tire pressures, and ensuring all lights and signals are functioning properly.