Harley-Davidson Electra Glide Standard Police 2008 Owner's Manual
![Harley-Davidson Electra Glide Standard Police 2008 Motorcycle manual cover](/images/hMEqZFCqLcCpEQeMjUwfgLwg/thumbs/thumb175x175.webp)
Harley-Davidson recommends using SAE 20W50 oil for the 2008 Electra Glide Standard Police model, particularly their own brand of synthetic oil for optimal performance and engine protection.
Oil changes should be performed every 5,000 miles or once a year, whichever comes first. Regular oil changes help maintain engine efficiency and longevity.
The recommended tire pressure for this model is 36 PSI for the front tire and 40 PSI for the rear tire. Proper tire pressure ensures optimal handling and tire longevity.
Start by checking the battery charge and connections. Ensure the kill switch is in the 'run' position and inspect the starter relay and fuses. If the problem persists, consult a professional mechanic.
Common causes of overheating include low coolant levels, faulty thermostat, or clogged radiator. Regular maintenance and checks can prevent these issues.
Regularly check brake fluid levels, inspect brake pads for wear, and ensure the brake rotors are in good condition. Replace any components that show signs of excessive wear.
Adjust the suspension by using the rear shock preload adjuster. Turn the adjuster clockwise to increase preload and counterclockwise to decrease it, based on your riding preference and load.
To replace the air filter, remove the cover screws, take off the air filter cover, and replace the old air filter with a new one. Ensure the new filter is seated properly before reattaching the cover.
The 2008 Electra Glide Standard Police has a fuel capacity of 6 gallons, which includes a 1-gallon reserve. This allows for extended rides without frequent refueling stops.
To improve fuel efficiency, maintain proper tire pressure, keep the engine tuned, and avoid excessive idling. Additionally, riding at a steady speed and avoiding rapid acceleration can help maximize fuel economy.