Harley-Davidson CVO Street Glide 2016 Owner's Manual
![Harley-Davidson CVO Street Glide 2016 Motorcycle manual cover](/images/gbjcttJgdycovvQyrCMZlZxR/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2016 CVO Street Glide is 36 psi for the front tire and 40 psi for the rear tire. Always refer to the owner's manual for the most accurate information.
To perform an oil change, start by warming up the engine. Then, place the bike on a stand, remove the drain plug, and let the old oil drain completely. Replace the oil filter and refill with the recommended oil type and quantity. Consult the owner's manual for specific details.
The 2016 CVO Street Glide typically requires SAE 20W50 oil. However, always check the owner’s manual or consult with a Harley-Davidson dealer for your specific model requirements.
If your 2016 CVO Street Glide won’t start, check the battery connections and charge. Ensure the kill switch is in the correct position and inspect the starter relay and fuses. If the issue persists, consult with a professional mechanic.
The maintenance schedule includes regular oil changes every 5,000 miles, checking and adjusting tire pressure, inspecting brake pads, and a full service check every 10,000 miles. Refer to the service manual for detailed intervals.
To adjust the suspension, first determine your preferred ride comfort. Use the preload adjuster located under the seat to make adjustments. Always refer to the user manual for specific instructions and settings.
If the infotainment system is not working, start by checking the fuse related to the system. Ensure all connections are secure. If issues continue, a system reset might be necessary, or consult with a Harley-Davidson service center.
To improve fuel efficiency, maintain correct tire pressure, perform regular engine maintenance, avoid aggressive acceleration, and ensure the air filter is clean. Following these tips can contribute to better mileage.
The recommended battery type for the 2016 CVO Street Glide is a 12V AGM (Absorbed Glass Mat) battery. Always ensure the battery meets the specifications outlined in the owner’s manual.
To replace the headlight bulb, remove the headlight trim ring, disconnect the wiring harness, and remove the old bulb. Install the new bulb, reconnect the harness, and secure the trim ring. Make sure the bulb is aligned correctly.