Haier HWD120-B1558 User Manual
![Haier HWD120-B1558 manual cover](/images/4d61528a9bb40f5934120fec/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Then, add the appropriate amount of detergent into the detergent drawer. Select the desired wash program using the control panel, adjust any additional settings if needed, and press the 'Start/Pause' button to begin the cycle.
If the machine is not draining, check for any blockages in the drain hose or pump filter. Make sure the hose is not kinked. Clean the pump filter located at the bottom of the machine by opening the filter cover and removing any debris.
To clean the detergent drawer, remove it by pulling it out fully and pressing down on the release lever. Wash the drawer with warm water to remove any detergent residue. Ensure it is completely dry before reinserting it into the washer.
Ensure that the washing machine is level by adjusting the feet. Make sure the load is balanced, and avoid overloading the drum. Use anti-vibration pads under the machine if necessary.
Regularly clean the detergent drawer, pump filter, and drum. Check and clean the door seal to prevent mold buildup. Inspect hoses for any signs of wear or leaks and replace them as needed.
Check if the machine is plugged in and the door is properly closed. Ensure the water supply is turned on and the program has been selected and started. If the problem persists, consult the manual for error codes or contact customer support.
Check if the water pressure is adequate and ensure the inlet hose is not kinked. Some cycles automatically adjust time based on the load size and balance, which might extend the cycle duration.
After selecting your desired wash program, press the 'Delay Start' button to set the time you want the wash to begin. You can adjust the time in increments as specified in the manual. Once set, press 'Start/Pause' to activate the delay timer.
Refer to the user manual for a list of error codes and their meanings. Follow the troubleshooting steps provided for each code. If the issue persists, contact Haier customer support for assistance.
Leave the door open after each wash to allow the drum to dry. Regularly clean the door seal and drum with a mixture of baking soda and vinegar. Use a washing machine cleaner periodically to eliminate any buildup.