Haier HRF-622CG User Manual
![Haier HRF-622CG manual cover](/images/e5e8103af81dbb984b1b0dff/thumbs/thumb175x175.webp)
To reset the temperature settings, press the "Refrigerator" or "Freezer" button on the control panel until you reach the desired temperature. The settings should automatically save after a few seconds.
Ensure that the doors are closing properly and that the seals are clean. Check if the temperature settings are correct and that there is sufficient space for air circulation. If the issue persists, contact Haier customer support for further assistance.
The freezer is frost-free, but if manual defrosting is needed, unplug the refrigerator, remove all items, and leave the door open until the ice melts. Clean and dry the compartment before restarting the appliance.
Unplug the refrigerator and remove all contents. Use a soft cloth with mild detergent and warm water to clean the interior, then dry with a soft towel. Avoid abrasive cleaners to prevent damage.
Replace the water filter every 6 months or when the indicator light turns on. To replace it, turn off the water supply, twist the old filter counterclockwise to remove, and install the new one by twisting it clockwise.
Check if the door is sealing properly and ensure that it is not left open for extended periods. Also, verify that the freezer temperature is not set too low. Adjust the settings if necessary.
Press and hold the "Lock" button on the control panel for 3 seconds to activate the child lock. This will prevent accidental changes to the settings.
Check if the refrigerator is level and that it is not touching any walls or cabinets. Some noise is normal, but if it persists or is loud, contact customer service for support.
Ensure the doors are closed properly, clean the condenser coils regularly, and avoid placing hot or warm food inside. Maintain adequate space around the refrigerator for proper ventilation.
Unplug the refrigerator, remove the cover of the light bulb by twisting it counterclockwise, replace the bulb with a new one of the same type, and reinstall the cover.