Haier HLP21N User Manual
![Haier HLP21N manual cover](/images/2b729e088243ffa6e0c005d5/thumbs/thumb175x175.webp)
To install the Haier HLP21N, first ensure it's on a level surface near a water supply and a drain. Connect the water inlet hose to the tap, ensuring the rubber gasket is in place to prevent leaks. Attach the drain hose to a suitable drainage point and plug the machine into a grounded outlet.
First, check if the drain hose is kinked or blocked. Ensure the hose is at the correct height to allow gravity to assist with draining. Also, examine the filter for clogs and clean it if necessary.
Locate the lint filter inside the drum of the washer. Pull it out gently, rinse under warm water to remove lint and debris, and then reinsert it securely. Regular cleaning helps maintain the washing efficiency.
Excessive vibration can be due to an unbalanced load. Try redistributing the laundry evenly in the drum. Ensure the washer is level, adjusting the feet if necessary. Check if any transit bolts are still in place if the unit is newly installed.
Regularly clean the lint filter and check the water inlet filters for blockages. Run an empty hot water cycle with white vinegar monthly to remove detergent buildup. Keep the exterior clean and dry, and ensure the machine is used on a level surface.
Unplug the washing machine from the power outlet and wait for about 5 minutes. Plug it back in and attempt to restart the cycle. If the issue persists, consult the user manual or customer support.
Ensure the lid is closed properly, as the machine will not spin if the lid is open. Check for an unbalanced load and redistribute clothing evenly. Verify that the spin cycle is selected on the control panel.
Yes, the Haier HLP21N has a delicate cycle option that uses gentle agitation and lower spin speeds to protect delicate fabrics. Always use a mild detergent and place delicate items in a mesh laundry bag.
Refer to the user manual for a list of error codes and their meanings. Common errors can often be resolved by resetting the machine, checking connections, or ensuring proper loading. For persistent issues, contact customer service.
Check for foreign objects like coins or buttons in the drum. Ensure the machine is level and not overloaded. If the noise continues, inspect the drum bearings and suspension rods or consult a technician.