Haier HDBL655AFS User Manual
![Haier HDBL655AFS manual cover](/images/7b262a323b9bf574fab31fca/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher, add detergent, select your desired wash cycle using the control panel, and press the start button. Make sure the door is securely closed for the cycle to begin.
Ensure that the drain hose is not kinked or clogged. Check the filter for any blockages and clean it if necessary. If the problem persists, consult the user manual or contact customer support.
It is recommended to clean the filter once a month to maintain optimal performance and prevent clogs.
Ensure that you are using a rinse aid, which helps with drying. Also, check if the selected cycle includes a drying option. If the issue persists, verify that the heating element is functioning correctly.
No, you should only use dishwasher-specific detergents. Regular dish soap can cause excessive suds and potentially damage the machine.
To reset the dishwasher, turn it off using the power button, unplug it or switch off the circuit breaker for a few minutes, then reconnect and turn it back on.
Check for any obstructions around the door seal and remove them. Ensure that the racks are properly aligned and not overloaded. If the door still doesn't close, inspect the latch for damage.
Regularly clean the filter and door seals. Run an empty cycle with a dishwasher cleaner or a cup of vinegar to remove build-up and odors. Leave the door slightly ajar after a cycle to allow moisture to escape.
Use high-quality automatic dishwasher detergents in powder, gel, or tablet form. Avoid using hand dishwashing liquids or detergents that produce excessive suds.
Ensure that dishes are loaded correctly, without blocking the spray arms. Use the appropriate amount of detergent and choose the correct cycle for the level of soil on your dishes. Clean the spray arms and filter regularly.