Gravely Pro-QXT 985911 2018 Operators Manual

The recommended oil type for the Gravely Pro-QXT 985911 2018 Tractor is SAE 10W-30 for general use. Always refer to the operator’s manual for specific recommendations based on your operating conditions.
It is advised to change the oil after the first 5 hours of use and then every 25 hours of operation or annually, whichever comes first.
Check the fuel level, ensure the battery is charged, inspect the spark plug for wear or damage, and verify that safety switches are engaged. Refer to the troubleshooting section of the manual for further guidance.
Regularly check tire pressure and adjust as needed to the recommended PSI. Inspect for any signs of wear or damage, and clean the tires to prevent debris build-up.
Clean the tractor thoroughly, perform any necessary maintenance, drain the fuel or add a fuel stabilizer, and store it in a dry, covered area. Disconnect the battery to prevent drainage.
Regularly inspect the blades for sharpness and damage. Sharpen or replace them as needed, and ensure they are properly balanced and securely fastened.
Check the transmission fluid level and top up if necessary. Inspect linkage and cables for proper adjustment and wear. Consult the service manual for detailed diagnostics.
Use a soft brush or cloth to remove debris from the exterior. Avoid using high-pressure water directly on the engine and electrical components. Clean the air filter and cooling fins regularly.
Inspect for loose or damaged parts, particularly the blades and engine mounts. Ensure that the cutting deck is balanced and that all fasteners are tightened to the correct torque specifications.
Perform regular maintenance as outlined in the operator’s manual, operate the tractor within its recommended limits, and store it properly when not in use. Regularly check for wear and replace parts as needed.