Gorenje WaveActive DS94ILS User Instructions

To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Remove the filter, clean off the lint by hand or using a soft brush, and reinsert it securely before resuming use.
Ensure the dryer is plugged in and the door is closed securely. Check the power supply and reset the circuit breaker if necessary. If the problem persists, refer to the user manual or contact customer support.
Use appropriate drying settings for different fabric types. Opt for a lower heat setting and remove clothes promptly after the cycle ends to prevent over-drying, which can cause shrinkage.
Check if the lint filter is clean and the ventilation ducts are clear. Overloading the dryer can also cause longer drying times. Adjust the load size and ensure proper airflow for optimal performance.
Regularly clean the lint filter, check and clean the exhaust vent for blockages, and inspect the dryer drum for any foreign objects. Schedule professional maintenance annually to ensure efficient operation.
To use the delay start function, select your desired drying program, press the delay start button, and set the desired delay time using the control knob. Press start to activate the delay.
Ensure there are no loose objects in the drum. Check for any obstructions in the drum or filter area. If noises persist, inspect the belt and drum support rollers for wear and tear.
While it is possible to dry sneakers, use a drying rack if available to prevent them from hitting the drum. Select a low heat setting to protect the material from damage.
Error code E3 typically indicates a heating issue. Check for blockages in the air vent, ensure proper power supply, and inspect the heating element. Contact a technician if the issue persists.
To reset the dryer, unplug it from the power source for a few minutes, then plug it back in. This can help resolve minor electronic glitches.