Gorenje WaveActive DE82 User Instructions
![Gorenje WaveActive DE82 Dryer manual cover](/images/PSiwblEsKVNgrOESiVmWcznk/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull the filter out, remove any lint by hand, and rinse it under warm water if necessary. Make sure it's completely dry before reinserting it back into the dryer.
First, check if the dryer is plugged in and that the circuit breaker has not tripped. Ensure the door is completely closed and the start button is pressed correctly. If the problem persists, consult the user manual or contact customer support.
If your dryer is taking longer to dry, check if the lint filter is clean and ensure the exhaust vent is not blocked. Overloading the dryer can also cause longer drying times. Adjust the load size and try again.
To reduce wrinkles, use the anti-crease function or select a program with a lower heat setting. Remove clothes promptly after the cycle ends and consider using fabric softener sheets.
Regularly clean the lint filter and ensure the exhaust vent is clear. Periodically check the drum for any foreign objects and clean the exterior surfaces with a damp cloth.
To use the time delay function, select your desired drying program, then press the time delay button to set the desired delay time. Confirm your selection by pressing the start button.
Unusual noises may be due to loose items like coins or buttons. Stop the dryer and check the drum for any foreign objects. If the noise persists, there may be a mechanical issue that requires professional service.
Refer to the user manual for guidance on program selection. Consider the type of fabric and desired dryness level. Use the control panel to navigate and select the appropriate program.
It is not recommended to dry shoes in the dryer as they can damage the drum or become damaged themselves. Consider air drying or using a shoe-specific drying rack if available.
To reset the dryer, unplug it from the power source for a few minutes, then plug it back in. If the issue persists, refer to the troubleshooting section of the user manual or contact customer support.