Gorenje WaveActive DE7B User Instructions
![Gorenje WaveActive DE7B Dryer manual cover](/images/WpsnmNMxjVkMSHgkoBtiBTsw/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the door opening. Pull it out, remove any lint buildup, and wash it under warm water if necessary. Ensure it is dry before reinserting it back into the dryer.
Check if the dryer is properly plugged in and that the circuit breaker is not tripped. Verify that the selected drying program is appropriate and ensure that the lint filter and exhaust vent are clear. If the problem persists, consider contacting Gorenje customer support.
To reduce drying time, make sure to clean the lint filter regularly, avoid overloading the dryer, and use the appropriate drying program for the load type. Additionally, ensure that the room is well-ventilated to allow for better air circulation.
Unusual noises may be caused by items caught in the drum or by an unbalanced load. Check for foreign objects and redistribute the load evenly. If the noise continues, inspect the drum seals and support rollers for wear and contact a technician if necessary.
Regularly clean the lint filter and check the exhaust vent for obstructions. Inspect the door seal for debris and clean it as needed. Also, periodically wipe the drum and exterior surfaces with a damp cloth to maintain cleanliness.
To reset the dryer, unplug it from the power source for a few minutes, then plug it back in. This can help clear minor electronic glitches. If the problem persists, consult the user manual or contact customer support.
Yes, fabric softener sheets can be used in the dryer. However, ensure that they do not interfere with the lint filter or exhaust vent, as this can reduce drying efficiency and potentially cause issues.
Ensure that the dryer is not overloaded and that clothes are sorted by fabric type and thickness. Check that the lint filter and exhaust vent are clear. If using a specific drying program, verify that it matches the load type.
Consult the user manual for guidance on program selection based on fabric type and load size. Use the control panel to navigate through the available options and select the program that best suits your needs.
This issue could be caused by a sensor detecting that the load is dry. Check the moisture sensor for any obstructions or dirt and clean it if necessary. If the problem continues, ensure that the selected program is appropriate or consult a technician.