Gorenje NRKI4181E1UK Installation Instructions
![Gorenje NRKI4181E1UK Refrigerator manual cover](/images/kQmwTXvXoConiWIIVokIByCh/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature adjustment buttons to set your desired temperature for both the refrigerator and freezer compartments.
Ensure the refrigerator is plugged in and the power supply is stable. Check if the temperature settings are correct. Make sure the vents inside are not blocked and the door seals are clean and closing properly.
The Gorenje NRKI4181E1UK Refrigerator is equipped with a NoFrost system, which means it does not require manual defrosting.
To clean the interior, unplug the refrigerator and remove all items. Use a mixture of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry with a soft cloth.
To replace the light bulb, first unplug your refrigerator. Locate the light cover inside the refrigerator, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Check if the door seals are clean and not damaged. Make sure there are no obstructions in the door path. If necessary, adjust the leveling feet to ensure the refrigerator is stable.
Store frequently used items in the front for easy access. Leave space between items for air circulation. Place raw meats on the lower shelves to prevent contamination.
Ensure the refrigerator is level and not touching any walls or surfaces. Check if any items inside are vibrating. It's normal for the compressor and fans to make some noise during operation.
Keep the refrigerator away from heat sources. Ensure the door seals are tight and not damaged. Do not overload the refrigerator and allow for adequate air circulation.
After a power outage, the refrigerator should resume normal operation. If not, unplug it for a few minutes and then plug it back in to reset the system.