Gorenje Classico IC634CLI User Instructions

To clean the hob, first ensure it is turned off and cooled down. Use a mild detergent and a soft cloth or sponge. Avoid abrasive cleaners and scrubbing pads that can scratch the surface. For tougher stains, use a specialized ceramic hob cleaner.
Check if the hob is correctly plugged in and the circuit breaker is not tripped. Ensure the control knobs are set correctly. If the issue persists, it might be a fault with the internal components and you should contact a service technician.
The Gorenje Classico IC634CLI hob features a child lock function. To activate it, press and hold the lock button until the indicator light turns on. To deactivate, repeat the process until the light goes off.
Use flat-bottomed cookware made of materials such as stainless steel, cast iron, or enamelled steel. Avoid using glass, ceramic, or thin-bottomed pans for optimal heat distribution and efficiency.
Each cooking zone has its own control knob. Turn the knob to the desired power level, ranging from minimum to maximum. The indicator will show the current setting.
Refer to the user manual for specific error code meanings. Common solutions include resetting the hob by turning it off and back on, ensuring proper ventilation, and checking for obstructions. If the error persists, contact customer support.
No, the Gorenje Classico IC634CLI hob requires electricity to operate. It will not function during a power outage. Ensure you have alternative cooking methods available during outages.
Always lift cookware instead of sliding it across the hob surface. Use cookware with smooth, clean bottoms. Regularly clean the hob to remove any debris that could cause scratches.
Routinely clean the hob after each use. Check and tighten any loose knobs or fittings. Inspect the power cord for any signs of wear or damage. Schedule periodic professional maintenance to ensure all components are in good condition.
Yes, slight clicking noises can occur as the hob cycles on and off to maintain the set temperature. However, if the noise is excessive or unusual, it may indicate a technical issue and should be checked by a technician.