Gorenje BO747ST User Instructions
![Gorenje BO747ST Oven manual cover](/images/QkMeRVTrANxLobdQNMZFtsrd/thumbs/thumb175x175.webp)
To set the oven to convection mode, turn the function knob to the convection setting, which is usually represented by a fan symbol. Adjust the temperature as needed using the temperature knob.
First, check if the oven is properly plugged in and that the circuit breaker is not tripped. Make sure the temperature settings are correct. If the issue persists, it may require professional service to check the heating elements or thermostat.
To clean the oven interior, remove all racks and accessories. Use a mild detergent with warm water or a specialized oven cleaner. Avoid abrasive cleaning agents and tools that might damage the surface.
Yes, the oven can be used without setting the timer. Simply set the desired function and temperature, and the oven will operate until you manually turn it off.
Ensure the oven is unplugged and cool. Remove the glass cover over the light bulb by unscrewing it. Replace the bulb with a new one of the same type and wattage, then screw the cover back in place.
The child lock feature prevents accidental operation of the oven. To activate it, press and hold the lock button until the indicator light appears. To deactivate, repeat the same process until the light turns off.
Smoke may result from food spills or grease residue burning off. Ensure the oven is clean, and avoid cooking at excessively high temperatures. If smoke persists, check for any remaining food debris.
Set the desired cooking function and temperature. The oven will automatically begin to preheat. Wait for the preheat indicator to signal that the oven has reached the set temperature before placing food inside.
Check for obstructions or food debris around the door seal. Ensure the hinges are not damaged. If the problem persists, contact customer support for assistance as the door may need adjustment or repair.
To reset the oven, turn off the power at the circuit breaker for a few minutes, then turn it back on. This will reset the electronic controls to their default settings.