Frigidaire FLCE7523AW Installation Instructions
![Frigidaire FLCE7523AW manual cover](/images/d95d8707c7866e8277d22ae3/thumbs/thumb175x175.webp)
To reset the Frigidaire FLCE7523AW, unplug the unit from the power outlet for a few minutes. Afterward, plug it back in and press the power button to restart.
Ensure that the dryer is properly connected to a power source and that the lint filter is clean. Check the circuit breaker and test the thermal fuse for continuity.
The lint filter should be cleaned after every use to ensure optimal dryer performance and to prevent fire hazards.
Check if the drain hose is kinked or clogged. Also, inspect the pump filter for any blockage and clean it if necessary.
The Frigidaire FLCE7523AW is designed as a stacked washer and dryer unit, so additional stacking is not recommended.
Run an empty wash cycle with hot water and a cup of white vinegar every month to keep the drum clean and free from odors.
Ensure the washer is level by adjusting its feet. Also, verify if the load is balanced and not overloaded.
Clean the dryer vent and exhaust duct regularly to prevent lint buildup, which can cause inefficient operation or a fire hazard.
Run a cleaning cycle with a washer cleaner or a mixture of baking soda and vinegar. Ensure the door is left open between uses to allow moisture to evaporate.
Ensure the lint filter is clean and the dryer vent is clear. Avoid overloading the dryer and use the appropriate heat setting for your fabrics.