Ford F-150 2009 Owners Guide
![Ford F-150 2009 manual cover](/images/aeZpBgbYsVLdsuuDHmcUmoNe/thumbs/thumb175x175.webp)
The recommended oil type for a 2009 Ford F-150 is 5W-20. It is important to use this viscosity grade to ensure optimal engine performance and longevity.
To reset the TPMS, turn the ignition to the ON position without starting the engine. Press and hold the TPMS reset button (usually located beneath the steering wheel) until the TPMS light blinks three times, then release the button. Start the engine and wait for 20 minutes.
The towing capacity of the 2009 Ford F-150 varies depending on the engine and configuration. It ranges from 5,100 to 11,300 pounds. Refer to the owner's manual for specific details based on your model.
It is recommended to change the transmission fluid every 30,000 to 60,000 miles under normal driving conditions. Check your owner's manual for specific intervals suited to your driving habits.
The 2009 Ford F-150 does not come with a replaceable cabin air filter as part of its standard configuration. Some aftermarket solutions are available if you wish to install one.
Rough idling in a 2009 Ford F-150 can be caused by several issues including a dirty throttle body, faulty spark plugs, or a clogged fuel filter. Inspect these components or consult a professional mechanic for a thorough diagnosis.
To jump-start your 2009 Ford F-150, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the donor battery. Connect the negative cable to the donor battery's negative terminal, and attach the other end to an unpainted metal surface on the F-150. Start the donor vehicle first, then your F-150.
A clicking noise when turning the steering wheel could be due to a worn CV joint, damaged steering column, or issues with the suspension system. It's best to have these components checked by a professional mechanic.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it, then pull out the old bulb. Insert the new bulb without touching the glass, and reinsert the socket into the headlight assembly. Secure it by twisting clockwise.
If the check engine light comes on, first ensure your gas cap is tightened properly. If the light remains on, use an OBD-II scanner to check for error codes or visit a mechanic to diagnose the issue. Avoid driving extensively to prevent potential damage.