Ford Crown Victoria 2010 Owners Guide

Ford Crown Victoria 2010 manual cover
Pages 308
Year 2010
Language(s)
English en

Ford Crown Victoria 2010 Specification

The 2010 Ford Crown Victoria is a full-size sedan known for its spacious interior and durability, commonly employed in fleet services such as law enforcement and taxi operations. It features a body-on-frame construction, providing robust structural integrity and ease of maintenance. Under the hood, the Crown Victoria is powered by a 4.6-liter SOHC V8 engine, delivering 239 horsepower and 287 lb-ft of torque, paired with a 4-speed automatic transmission. The rear-wheel-drive configuration enhances handling and provides a traditional driving experience.

The vehicle's suspension system includes a front independent short and long arm setup with a stabilizer bar and a rear live axle with coil springs, ensuring a balance of comfort and stability. Safety is prioritized with standard four-wheel anti-lock disc brakes and traction control. Inside, the cabin offers seating for up to six passengers with ample legroom and headroom, complemented by dual-zone climate control and standard power accessories.

The Crown Victoria's exterior dimensions include an overall length of 212 inches, a width of 78.3 inches, and a height of 58.3 inches, contributing to its commanding road presence. The sedan rides on 17-inch steel wheels, often equipped with all-season tires suitable for various driving conditions. Fuel efficiency is rated at approximately 16 mpg in the city and 24 mpg on the highway, supported by a fuel tank capacity of 19 gallons, allowing for extended driving ranges.

Overall, the 2010 Ford Crown Victoria stands out for its reliability, spaciousness, and traditional rear-wheel-drive dynamics, making it a preferred choice for demanding fleet applications and drivers seeking a no-nonsense, durable sedan.

Ford Crown Victoria 2010 F.A.Q.

How do I reset the oil change light on a 2010 Ford Crown Victoria?

To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Press the "Setup" button until you see "Oil Life Reset" on the display. Press and hold the "Reset" button until it shows 100%.

What type of engine oil is recommended for a 2010 Ford Crown Victoria?

The recommended engine oil for the 2010 Ford Crown Victoria is 5W-20. Ensure you use oil that meets Ford specification WSS-M2C930-A.

How can I check the transmission fluid level on my 2010 Ford Crown Victoria?

To check the transmission fluid level, warm up the engine, park on a level surface, and leave the engine idling. Remove the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the fluid level.

What is the recommended tire pressure for a 2010 Ford Crown Victoria?

The recommended tire pressure for the 2010 Ford Crown Victoria is typically 32 psi for both front and rear tires. Always check the owner's manual or the tire placard for specific recommendations.

Why is my 2010 Ford Crown Victoria's check engine light on?

A check engine light can indicate various issues such as a loose gas cap, faulty oxygen sensor, or misfiring engine. It's best to use an OBD-II scanner to diagnose the specific cause.

How often should I replace the air filter in my 2010 Ford Crown Victoria?

It is recommended to replace the air filter every 15,000 to 30,000 miles, but this may vary based on driving conditions. Check it every oil change for excessive dirt or damage.

What could be causing a vibration in my 2010 Ford Crown Victoria at highway speeds?

Common causes of vibration at highway speeds include unbalanced wheels, misaligned tires, or worn suspension components. It's advisable to have a professional inspection to pinpoint the issue.

How do I replace a headlight bulb in a 2010 Ford Crown Victoria?

To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector, twist and remove the old bulb, and insert the new bulb. Reattach the connector.

What are the symptoms of a failing alternator in a 2010 Ford Crown Victoria?

Symptoms of a failing alternator include dimming lights, electrical malfunctions, a dead battery, and a warning light on the dashboard. Testing the alternator's voltage output can confirm issues.

How do I fix a leaking sunroof in my 2010 Ford Crown Victoria?

To fix a leaking sunroof, check and clear any debris from the sunroof drains. Ensure the seal around the sunroof is intact and replace it if necessary. If issues persist, consult a professional.