Flir VT8 Series Quick Start Guide

Pages 6

Year 2018

Language(s)

of 6

Flir VT8 Series Tester Specification

The Flir VT8 Series Tester is a versatile and compact electrical testing tool designed for professional electricians and technicians. This multimeter is engineered to provide high accuracy and reliability in measuring voltage, current, resistance, and continuity, making it indispensable for troubleshooting electrical systems. It features an extended open-jaw design that allows for the testing of cables up to 15.5 mm in diameter, accommodating larger wires typically found in industrial environments. The device supports both AC and DC voltage measurements up to 1000 V and AC and DC current measurements up to 200 A, ensuring compatibility with a wide range of electrical systems.

The VT8 Series is equipped with a large, backlit LCD display that enhances visibility in low-light conditions, facilitating ease of use in various working environments. It also features a built-in non-contact voltage detector, which provides an added layer of safety by allowing users to quickly identify live wires without making physical contact. The tester is designed with a robust and ergonomic housing, ensuring durability and comfort during prolonged use. Safety features include CAT IV-600 V and CAT III-1000 V safety ratings, ensuring the tester can be used safely on high-energy circuits.

Additional functionalities include data hold and auto power-off features, which contribute to efficient power management and ease of data analysis. The VT8 Series is powered by standard AAA batteries, providing convenience and ease of replacement. This tester combines innovative features and robust design, making it an essential tool for any professional needing reliable and accurate electrical measurements in demanding environments.

Flir VT8 Series Tester F.A.Q.

How do I perform a continuity test with the FLIR VT8 Series Tester?

To perform a continuity test, first ensure the device is powered off. Set the dial to the continuity test position. Connect the test leads to the device under test. If continuity exists, the tester will emit a beep sound.

What should I do if the display on my FLIR VT8 is not turning on?

First, check the battery compartment to ensure the batteries are properly installed and have sufficient charge. Replace batteries if necessary. If the issue persists, check for any visible damage or contact FLIR support.

How can I measure voltage using the FLIR VT8 Series Tester?

To measure voltage, turn the dial to the appropriate AC or DC voltage setting. Connect the test leads across the component or circuit whose voltage you want to measure. Read the voltage level displayed on the screen.

What is the correct way to store the FLIR VT8 Tester when not in use?

Store the FLIR VT8 Tester in a cool, dry place. Ensure the device is turned off and the test leads are disconnected. Use the protective carrying case if available to prevent physical damage.

How do I change the batteries in the FLIR VT8 Series Tester?

To change the batteries, open the battery compartment located at the back of the tester using a screwdriver. Remove the old batteries and insert new ones, ensuring correct polarity. Close the compartment securely.

Can I use the FLIR VT8 Series Tester to measure resistance?

Yes, you can measure resistance by turning the dial to the resistance measurement setting. Connect the test leads to the resistor or circuit, and the resistance value will be shown on the display.

What precautions should I take while using the FLIR VT8 Tester on live circuits?

Always ensure that you are wearing appropriate personal protective equipment (PPE) and that the test leads are rated for the voltage level of the circuit. Avoid touching exposed conductors and follow all safety guidelines.

How can I calibrate my FLIR VT8 Tester?

Calibration of the FLIR VT8 Tester should be performed by a qualified professional. Contact FLIR support or an authorized service center for calibration services to ensure accurate measurements.

Is it possible to test diodes with the FLIR VT8 Tester?

Yes, set the dial to the diode test mode. Connect the test leads to the diode; the tester will display the forward voltage drop. Reverse the leads to check for high resistance in the opposite direction.

What should I do if the FLIR VT8 gives inaccurate readings?

Ensure the test leads are in good condition and properly connected. Check the battery level and replace if low. If inaccuracies persist, the device may need recalibration or servicing by a qualified technician.