Dodge Challenger 2021 Quick Start Guide
![Dodge Challenger 2021 Coupe manual cover](/images/uukGvpQnLkmzOAHHhRaqYHAI/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2021 Dodge Challenger Coupe is typically 32 psi for both the front and rear tires. However, it's always best to check the driver's side door jamb for the manufacturer's specification.
To reset the oil change indicator, turn the ignition to the 'ON' position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds and then turn the ignition off. Start the engine to ensure the reset was successful.
The 2021 Dodge Challenger typically requires SAE 0W-40 engine oil for optimal performance. Always refer to the owner's manual for specific recommendations based on your engine type.
To improve fuel efficiency, maintain steady speeds, avoid rapid acceleration, keep tires properly inflated, perform regular maintenance, and remove unnecessary weight from the vehicle.
First, ensure Bluetooth is enabled on both your phone and the car's system. Delete any old connections and try pairing again. If issues persist, restart both devices and check for software updates.
Brake pads should be inspected regularly and typically replaced every 30,000 to 70,000 miles depending on driving habits and conditions.
If the check engine light illuminates, check for any obvious issues such as a loose gas cap. If the light persists, have the vehicle diagnosed by a professional to identify any underlying issues.
To replace a headlight bulb, turn off the vehicle, open the hood, and locate the back of the headlight assembly. Remove the bulb cover, disconnect the old bulb, and insert the new bulb. Reattach the cover and test the light.
The 2021 Dodge Challenger has a towing capacity of up to 1,000 lbs. However, it's advisable not to use the Challenger for towing as it is not designed as a towing vehicle.
To update the navigation system, visit the Uconnect website to check for available updates. You can download the update onto a USB drive and then insert it into the vehicle's USB port to initiate the update process.