Dirt Devil Convertible Hand & Stick M083460 Owner's Manual
![Dirt Devil Convertible Hand & Stick M083460 manual cover](/images/zatuaYYbtrsuCYeCiyrfzApp/thumbs/thumb175x175.webp)
To convert from a stick vacuum to a hand vacuum, remove the handle by pressing the release button and pulling the handle out. Then, detach the floor nozzle and attach the desired accessory.
Check if the dust container is full and needs emptying. Also, inspect the filter and clean or replace it if necessary. Ensure that the nozzle and hose are free from blockages.
The filter should be cleaned after every few uses or when you notice a decrease in suction power. Rinse it under warm water and let it air dry completely before reinserting.
Yes, the dust container can be washed with warm soapy water. Ensure it is thoroughly dry before reattaching it to the vacuum.
This vacuum is designed to clean a variety of surfaces including hardwood floors, carpets, and upholstery. Use the appropriate attachments for best results.
Check if the vacuum is plugged in properly. Inspect the power cord for any damage. If using a battery, ensure it is charged. Also, examine the vacuum for any blockages or overheating.
Regularly empty the dust container, clean the filter, and check for blockages. Inspect the brush roll and remove any hair or debris wrapped around it.
Store the vacuum in an upright position in a cool and dry place. Detach any accessories and store them separately to prevent damage.
Turn off the vacuum and check for blockages in the hose or nozzle. Inspect the brush roll for any obstructions. Ensure all parts are securely attached.
Yes, it is normal for the vacuum to become warm during extended use. However, if it becomes excessively hot, turn it off and let it cool down before continuing.