Dimplex OFX 100E Technical Guide
![Dimplex OFX 100E Radiator manual cover](/images/NaVeAVeDBONtxfaqjktimXXb/thumbs/thumb175x175.webp)
To install the Dimplex OFX 100E Radiator, securely mount it to a wall using the supplied brackets, ensuring it is level. Connect it to a power outlet and follow the user manual for further instructions.
Check if the radiator is properly plugged in and the power switch is turned on. Ensure that the thermostat is set to a higher temperature than the current room temperature. If the issue persists, consult the troubleshooting section in the user manual.
To clean the radiator, first ensure it is switched off and unplugged. Use a soft, damp cloth to wipe the surface. Avoid using abrasive cleaners or solvents.
Some noise is normal as the metal expands and contracts with heat. However, if you hear unusual noises, ensure the radiator is installed correctly and not in contact with other objects.
To reset the thermostat, turn the power off for a few minutes, then turn it back on. Adjust the thermostat to the desired setting.
The Dimplex OFX 100E Radiator is not suitable for use in areas with high humidity, such as bathrooms, unless specified by the manufacturer. Always refer to the user manual.
Regularly clean the radiator every few months and inspect for any visible damage or wear. Ensure that the electrical connections are secure.
The Dimplex OFX 100E Radiator is designed to be energy-efficient with a thermostat to regulate temperature. For optimal efficiency, ensure it is used in appropriately sized rooms.
Check for any overloading on the circuit. Ensure the radiator is the only high-power device on the circuit. If the problem persists, consult a qualified electrician.
Use the thermostat dial or digital controls (if equipped) to set the desired temperature. Refer to the user manual for detailed instructions.