Dimplex LA 22TU Brochure V1
![Dimplex LA 22TU Heat Pump manual cover](/images/HmyIfUgYhTDBGdUWHudQeRge/thumbs/thumb175x175.webp)
To reset the Dimplex LA 22TU heat pump after a power outage, turn off the power supply to the unit for about 5 minutes. Then, turn the power back on and the system should reset itself automatically.
Regular maintenance for the Dimplex LA 22TU includes cleaning the air filter every three months, checking for debris around the outdoor unit, and having a professional service the system annually.
To improve efficiency, ensure that the outdoor unit is free from obstructions, regularly clean or replace air filters, and set the thermostat to an optimal temperature.
If the heat pump is not heating properly, check the thermostat settings, ensure the unit is not in defrost mode, and inspect for any tripped circuit breakers. If problems persist, contact a professional technician.
Unusual noises can be caused by debris in the fan, loose parts, or ice build-up. Turn off the system and inspect the unit. If the noise continues, consult a professional technician.
To switch from heating to cooling, adjust the thermostat to the desired cooling temperature and select the cooling mode on the control panel. Ensure the system is set to 'Auto' for automatic switchovers.
Common error codes include E1 for sensor faults and E2 for compressor issues. Refer to the user manual for specific troubleshooting steps or contact customer support for assistance.
Installation of the Dimplex LA 22TU heat pump should be performed by a qualified technician to ensure proper setup and adherence to local regulations.
The air filter should be checked every three months and cleaned or replaced as necessary to maintain optimal performance of the heat pump.
The defrost cycle automatically activates to melt any ice build-up on the outdoor unit. This process temporarily reverses the heat pump operation to warm the coils and usually lasts a few minutes.