Davis Lil Fella 462 Instruction Manual

To install the Davis Lil Fella 462 Trolling Plate, first ensure the motor is turned off and securely lift the motor out of the water. Attach the trolling plate to the anti-ventilation plate or cavitation plate using the included hardware, ensuring that it is centered and tightly secured. Refer to the user manual for detailed step-by-step instructions and safety precautions.

If the trolling plate doesn't fully deploy, check for obstructions or debris that may be blocking its movement. Ensure that the locking mechanism is not engaged while deploying. Lubricate the hinge points with marine-grade lubricant to ensure smooth operation. If the issue persists, inspect for any damage or bent components and consult the manufacturer if necessary.

Regular maintenance includes rinsing the trolling plate with fresh water after each use to remove salt and debris. Inspect for any signs of wear or corrosion, and apply a protective marine-grade lubricant to the moving parts. Store the plate in a dry environment when not in use to prevent rust and corrosion.

The Davis Lil Fella 462 Trolling Plate is designed to fit most small to medium-sized outboard motors, typically up to 25 horsepower. However, it's recommended to check the specific dimensions and mounting requirements to ensure compatibility with your motor.

If the trolling plate creates excessive drag, verify that it is properly aligned and not mounted too low on the motor. Ensure the plate is not damaged or bent, as this can affect hydrodynamics. Adjust the mounting if necessary and test at various speeds to find the optimal position.

Yes, the Davis Lil Fella 462 Trolling Plate is suitable for use in saltwater environments. However, it is crucial to rinse it with fresh water after each use to prevent salt buildup and corrosion. Regular maintenance will help extend its lifespan when used in such conditions.

The trolling plate is designed to slow down your boat's speed for better trolling control. It may slightly affect handling at higher speeds due to increased drag, but proper installation and adjustment can minimize this effect. Always ensure the plate is securely locked in the up position when not in use to maintain optimal speed and handling.

If the trolling plate becomes damaged, assess the extent of the damage. Minor bends can sometimes be corrected by carefully bending the plate back into shape. For significant damage, it might be necessary to replace the plate or consult with the manufacturer for repair options. Always ensure the integrity of the plate before operating the boat.

To adjust the tension on the trolling plate, locate the tension adjustment bolts near the hinge. Tighten or loosen these bolts to achieve the desired tension, ensuring the plate deploys and retracts smoothly without excessive force. Refer to the user manual for specific adjustment guidelines.

When not in use, store the trolling plate in a dry, cool place away from direct sunlight to prevent UV damage. It is advisable to remove the plate from the motor if storing for an extended period. Ensure it is clean and dry before storage to prevent corrosion and other damage.