Danby DWC172BL Owner's Manual
![Danby DWC172BL Cooler manual cover](/images/auifBObBaYAnsEqhxMdipYQb/thumbs/thumb175x175.webp)
To set the temperature on your Danby DWC172BL Cooler, turn the temperature control dial located inside the unit. Adjust the dial to the desired cooling level, typically between 4°C and 12°C (39°F to 54°F), depending on your preference.
If your Danby DWC172BL Cooler is not cooling properly, ensure that the unit is plugged in and the temperature control dial is set to a colder setting. Check the door seal for any gaps or damage and make sure the unit is not overloaded. Clean the condenser coils and ensure there is sufficient clearance around the unit for proper ventilation.
It is recommended to clean the condenser coils on your Danby DWC172BL Cooler every 3 to 6 months. This helps maintain efficient cooling and prolongs the lifespan of the unit.
Regular maintenance for the Danby DWC172BL includes cleaning the condenser coils, checking and cleaning the door seals, ensuring proper ventilation, and occasionally inspecting the temperature control settings.
Unusual noises from your Danby DWC172BL Cooler can be caused by a few factors including the unit being unlevel, items inside the cooler vibrating against each other, or the fan or compressor operating. Ensure the cooler is on a level surface and check that items inside are not touching the walls.
To improve energy efficiency, ensure that your Danby DWC172BL Cooler is placed away from direct sunlight and heat sources. Keep the door closed as much as possible, do not overload the cooler, and regularly clean the condenser coils.
Yes, you can store both red and white wines in the Danby DWC172BL Cooler. Adjust the temperature setting to accommodate the type of wine you are storing, with whites typically requiring cooler temperatures than reds.
If the door of your Danby DWC172BL Cooler does not seal properly, inspect the door gasket for any signs of damage or dirt. Clean the gasket with warm soapy water, and if it is damaged, consider replacing it to ensure a proper seal.
The Danby DWC172BL Cooler is designed to defrost automatically. However, if manual defrosting is needed, turn off the cooler, remove all items, and allow the ice to melt. Clean up any water and restart the cooler.
Yes, it is normal for the Danby DWC172BL Cooler to cycle on and off frequently as it maintains the set temperature. However, if the cycling becomes excessive, it could indicate an issue with the thermostat or door seal.