Danby DFF092C1BSLDB Owner's Manual

To set the temperature, use the control knob located inside the fridge. For optimal performance, set the temperature between 3°C and 5°C for the refrigerator and -18°C for the freezer compartment.
Unusual noises can be due to improper leveling or items inside the fridge vibrating. Ensure the refrigerator is on a level surface and that items inside do not touch the interior walls.
Keep the refrigerator well-stocked without overcrowding, ensure the door seals are tight, and avoid placing the fridge near heat sources like ovens or direct sunlight.
Check if the vents inside are blocked, ensure the temperature settings are correct, and clean the condenser coils if accessible. If the issue persists, contact a service technician.
It is recommended to clean the interior of your refrigerator every three months to prevent odors and mold. Use a mild detergent and warm water for cleaning.
To defrost, remove all items from the freezer, unplug the refrigerator, and leave the freezer door open. Use towels to absorb melting ice. Once defrosted, clean and dry the compartment before plugging the refrigerator back in.
Water pooling can be due to a blocked defrost drain. Clean the drain using a mixture of baking soda and warm water to ensure proper drainage.
Store raw meats on the bottom shelf to prevent drips, use the crisper drawers for fruits and vegetables, and keep dairy products on the upper shelves for optimal freshness.
Close the door on a piece of paper or a dollar bill. If you can pull it out easily, the seal may need to be cleaned or replaced. Ensure the seals are free from food residue and cracks.
Regular maintenance includes cleaning the condenser coils, checking door seals, defrosting the freezer if necessary, and cleaning the interior and exterior surfaces.