Danby DER202BSS Owner's Manual
![Danby DER202BSS Range manual cover](/images/CRNQdEijoUKFeNoxJbYbVjSA/thumbs/thumb175x175.webp)
To clean the surface of your Danby DER202BSS Range, use a mild detergent and a soft cloth. Avoid abrasive cleaners and pads as they can scratch the surface. Make sure the range is cool before cleaning.
Ensure that the oven racks are placed correctly and that food is centered in the oven. If the issue persists, verify the calibration of the thermostat or consult a technician for further diagnostics.
To reset the control panel, turn off the range and unplug it from the power source for a few minutes. Plug it back in and turn it on to see if the control panel resets.
The clicking noise can occur during the ignition process of the burners. If the clicking is continuous, check for any obstructions or moisture around the igniter and clean if necessary.
Ensure the range is off and cool. Remove the light cover inside the oven by turning it counterclockwise. Replace the bulb with a new one of the same type and wattage, then replace the cover.
Regularly clean the exterior and interior surfaces, check burners and igniters for debris, and inspect the door seals. Annually, have a professional inspect the range for safety and efficiency.
Use the correct pot size for burners, keep the oven door closed as much as possible, and ensure the range is clean and well-maintained. Regularly check door seals to ensure they are intact.
Check for obstructions around the door and ensure the door seals are intact and clean. If the hinges are misaligned, they may need adjustment or replacement by a professional.
Ensure burners are clean and dry before use. Use a splatter guard or lids to minimize food spillage while cooking. Regular cleaning helps prevent residue buildup.
Check the power supply to ensure the range is plugged in and the circuit breaker is not tripped. If the issue persists, the display panel may need servicing by a qualified technician.