Danby DCR041C1BSLDB-6 Owner's Manual

To adjust the temperature, locate the thermostat dial inside the refrigerator. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
Ensure the door is closing properly, check the thermostat settings, and clean the condenser coils. If the problem persists, consider contacting a service professional.
It's recommended to defrost your refrigerator whenever the frost build-up reaches about 1/4 inch thickness.
Yes, the door swing on the Danby DCR041C1BSLDB-6 can be reversed. Refer to the user manual for step-by-step instructions.
Use a solution of mild soap and warm water. Avoid using harsh chemicals or abrasives. Wipe down all surfaces and dry thoroughly.
Ensure the refrigerator is level and not touching the wall or other surfaces. Check for loose parts and tighten them if necessary.
The refrigerator requires a standard 115V / 60Hz outlet. Ensure that it is grounded and avoid using extension cords.
Keep the refrigerator away from heat sources, ensure the door seals are intact, and maintain a consistent temperature setting.
Check the bulb and replace it if burnt out. If the bulb is not the issue, inspect the light switch or contact customer support.
It is best to allow hot food to cool to room temperature before storing it in the refrigerator to prevent undue strain on the appliance.