Danby DBMF100C1SLDB Owner's Manual

To set the temperature, use the control dial located inside the fridge. It is recommended to start with a medium setting and adjust as necessary based on your cooling needs.
Check to ensure that the door is fully closed and the seal is intact. Also, verify that the temperature setting is correct and the vents inside the unit are not blocked.
This model is equipped with an automatic defrost feature, but if you notice significant frost buildup, manually defrost by turning off the unit and allowing the ice to melt completely.
Use a solution of warm water and mild detergent to clean the interior. Avoid abrasive cleaners and make sure to dry all surfaces thoroughly before turning the unit back on.
Ensure that the refrigerator is level and not touching any walls or cabinets. Check for loose items inside that might be vibrating, and ensure the condenser fan and compressor are clean and unobstructed.
Inspect the door gasket for damage or dirt. Clean with warm soapy water and ensure it is dry. If the gasket is damaged, it may need to be replaced.
Yes, the shelves in the Danby DBMF100C1SLDB are adjustable. Simply lift the shelf up and pull it towards you to remove, then reposition it to the desired height.
Ensure the refrigerator is placed in a cool area away from heat sources and direct sunlight. Keep the coils clean and do not overload the refrigerator to allow for proper air circulation.
This could be due to a blocked defrost drain. Try cleaning the drain using a mixture of water and vinegar to clear any blockages.
Unplug the refrigerator and remove the cover of the light compartment. Unscrew the old bulb and replace it with a new one of the same type and wattage.