Danby DBC93BLSDD Owner's Manual

To adjust the temperature settings, press the 'Temperature' button on the control panel. Use the '+' and '-' buttons to set the desired temperature.
First, ensure that the cooler is plugged in and the power is on. Check if the door is sealing properly and the vents are not blocked. If the issue persists, contact customer support.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance.
To defrost, unplug the cooler and remove all contents. Allow the ice to melt naturally, then clean the interior with a soft cloth.
Ensure the cooler is level and not touching any nearby objects. Check for loose parts and tighten if necessary.
It is not recommended to use an extension cord as it may cause voltage drops, affecting the cooler's performance.
Regularly clean the interior and exterior, defrost as needed, and inspect the door seals to ensure they are intact.
If the door seal is damaged, it should be replaced to maintain proper cooling efficiency. Contact Danby customer service for replacement parts.
Keep the cooler away from direct sunlight and heat sources. Ensure the door is closed properly and avoid frequent openings.
Check if the drain pan is properly positioned and not overflowing. Inspect any hoses for leaks. If the leak persists, contact a technician.