Danby DBC026A1BSSDB Owner's Manual
![Danby DBC026A1BSSDB Cooler manual cover](/images/uyWNQRUyPWwKdhwnLBpuqyBe/thumbs/thumb175x175.webp)
To set the temperature, press the 'Set' button until the desired temperature is displayed. Use the '+' or '-' buttons to adjust the temperature.
Ensure that the cooler is plugged in and the power outlet is functioning. Check if the door is completely closed and the seals are intact. Additionally, make sure the vents are not blocked.
It is recommended to clean the condenser coils every six months to ensure optimal performance.
The Danby DBC026A1BSSDB is designed primarily as a beverage cooler. It is not recommended for storing perishable food items.
The cooler operates best in an ambient temperature range of 50°F to 85°F (10°C to 29°C).
To defrost, unplug the cooler and leave the door open. Allow the ice to melt naturally, then clean and dry the interior before plugging it back in.
Check if the cooler is level and on a stable surface. Ensure there are no loose parts or obstructions in the fan or compressor area.
Keep the cooler in a cool, shaded place away from direct sunlight and heat sources. Ensure the door seals are intact and limit door openings.
Place the cooler on a flat, level surface, leaving at least two inches of clearance on the sides and back for proper ventilation. Ensure the cooler is connected to a grounded electrical outlet.
To reset the control panel, unplug the cooler for 5 minutes, then plug it back in. The control panel should reset to default settings.