Danby DAR022A1BDB Owner's Manual

To adjust the temperature, locate the thermostat dial inside the refrigerator. Turn the dial clockwise to a higher number for a colder setting, or counter-clockwise to a lower number for a warmer setting.
Ensure the refrigerator is plugged in and the thermostat is set correctly. Check for any obstructions blocking air circulation inside the fridge. Also, verify that the door seals are clean and not damaged.
To defrost, unplug the refrigerator and remove all contents. Leave the door open and let the ice melt naturally. Use a towel to soak up excess water and dry the interior before plugging it back in.
Unusual noises can be caused by the refrigerator being uneven on the floor. Adjust the leveling legs to ensure it is stable. Also, ensure items inside are not vibrating against each other or the walls.
Unplug the refrigerator and remove all items. Use a mild detergent and warm water to clean the interior and shelves. Rinse with clean water and dry thoroughly before replacing the items and plugging it back in.
Unplug the refrigerator and locate the light bulb cover inside. Remove the cover by turning it counterclockwise or unscrewing. Replace with a new bulb of the same type and wattage, then reattach the cover.
Yes, the door is reversible. Follow the instructions in the user manual to change the door hinge to the opposite side, ensuring all screws are securely fastened after adjustment.
Check the drain tube for blockages and ensure it is properly connected. Clean any debris from the tube and ensure that it is not kinked, allowing water to flow freely.
Clean the condenser coils every six months to ensure efficient operation. Use a vacuum or a soft brush to remove dust and debris.
Yes, it is normal for the sides and back of the refrigerator to feel warm due to the heat released by the condenser during operation. Ensure there is proper ventilation around the unit.