Cobra CJS 50 Operation Instructions

To start the Cobra CJS 50, ensure that the fuel tank is filled. Turn the ignition key to the 'on' position, then press the start button while holding the brake lever.
If the engine does not start, check the fuel level, ensure the ignition is on, inspect the spark plug for damage, and confirm that the battery is charged.
It is recommended to change the oil every 1,000 kilometers or every six months, whichever comes first, to ensure optimal performance.
The Cobra CJS 50 is designed to run on unleaded gasoline with an octane rating of 90 or higher.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, and avoid aggressive acceleration and braking.
The recommended tire pressure for the Cobra CJS 50 is 29 psi for the front tire and 33 psi for the rear tire.
To adjust the brakes, locate the brake adjustment screw near the brake lever. Turn it clockwise to tighten or counterclockwise to loosen the brake tension.
Check the bulb for any signs of damage, ensure the headlight switch is in the 'on' position, and inspect the fuse box for any blown fuses.
Regularly check the battery terminals for corrosion, ensure it is charged, and avoid discharging it completely. Consider using a trickle charger if the scooter is not used for extended periods.
To clean the air filter, remove the air filter cover, take out the filter, clean it with compressed air or soap and water, and allow it to dry completely before reinstalling.