Citroën DS 3 Crossback 2020 Handbook
![Citroën DS 3 Crossback 2020 Crossover manual cover](/images/YSOaHVAxIiXroVTWDTwWVIVM/thumbs/thumb175x175.webp)
To pair your smartphone, go to the settings menu on the infotainment system, select 'Bluetooth', and then 'Pair New Device'. Ensure Bluetooth is enabled on your smartphone, and select the car from the list of available devices.
The recommended tire pressure for the Citroën DS 3 Crossback 2020 is typically 2.3 bar for the front tires and 2.1 bar for the rear tires. Always refer to the vehicle's manual or the sticker on the driver's side door for precise values.
To reset the service light, turn the ignition to the 'ON' position without starting the engine. Press and hold the '000' button on the dashboard until the display counts down and the light resets.
The recommended engine oil for the Citroën DS 3 Crossback 2020 is typically a synthetic 5W-30 oil. Always check your owner's manual for the exact specifications.
To replace the cabin air filter, locate the filter housing under the dashboard on the passenger side. Remove the cover, take out the old filter, and install a new one ensuring the airflow direction matches the arrow on the filter.
If the vehicle won't start despite a charged battery, check the starter, fuel system, and ignition system. Ensure the key fob battery is working and try jump-starting the car or consulting a professional mechanic.
To activate cruise control, press the 'CRUISE' button on the steering wheel. Use the '+' and '-' buttons to set and adjust the speed. To deactivate, press the 'CANCEL' button or tap the brake pedal.
If the infotainment screen freezes, try performing a soft reset by holding down the power button until the system reboots. If the problem persists, check for software updates or consult your dealer.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, drive smoothly, and avoid excessive idling. Use the 'Eco' driving mode if available.
To check the transmission fluid level, ensure the car is on a level surface and the engine is warm. Locate the transmission dipstick, remove it, wipe it clean, reinsert it fully, and then remove it again to check the level.