Citroën C3 Aircross 2023 Handbook
![Citroën C3 Aircross 2023 SUV manual cover](/images/nxeNwnfrJIiKBPrzbdaAILQJ/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are correctly inflated. Access the vehicle settings on the infotainment screen, navigate to 'Vehicle Settings,' and select 'Tire Pressure Reset.' Confirm the reset and drive the vehicle above 12 mph for several minutes to recalibrate the system.
The recommended oil type for the Citroën C3 Aircross 2023 is 5W-30 synthetic oil. Always refer to the owner's manual for the most accurate and specific recommendations based on your engine type.
To pair your smartphone, activate Bluetooth on your phone and the vehicle's infotainment system. On the infotainment screen, select 'Bluetooth,' then 'Pair New Device.' On your phone, select the vehicle's Bluetooth name and verify the pairing code matches. Confirm the pairing on both devices.
If the vehicle won't start, first check the battery connections and ensure they are clean and tight. Verify that the key fob battery is not depleted. If the issue persists, consult the vehicle's manual for further troubleshooting steps or contact a professional mechanic.
Hill start assist engages automatically when the vehicle is on a slope. To activate, keep the brake pedal pressed while on a gradient, and the system will temporarily hold the brake pressure after you release the pedal, giving you time to accelerate.
To check the engine coolant level, ensure the engine is cool. Open the hood and locate the coolant reservoir. The level should be between the 'MIN' and 'MAX' markings. If low, add coolant as specified in the owner’s manual.
To replace a headlight bulb, turn off the engine and open the hood. Locate the headlight assembly at the front of the vehicle. Remove the protective cover, disconnect the electrical connector, and take out the faulty bulb. Insert the new bulb without touching the glass, reconnect the connector, and replace the cover.
To activate cruise control, accelerate to your desired speed, then press the 'Cruise Control' button on the steering wheel. Use the '+' and '-' buttons to adjust the speed as needed. To deactivate, press the 'Cancel' button or apply the brakes.
If the air conditioning is not cooling properly, check the cabin air filter for blockages and replace if necessary. Ensure the refrigerant level is adequate. If the problem persists, it may require professional inspection for potential leaks or compressor issues.
To perform a factory reset, access the settings menu on the infotainment screen. Navigate to 'System Settings,' then 'Factory Reset.' Confirm the reset, and the system will restore to its original settings. Note that this will erase all personal data and saved settings.