Citroën Berlingo 2021 Handbook
![Citroën Berlingo Van 2021 Van manual cover](/images/oTVVRSUMULLKghGOBOrirjhx/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to the "ON" position without starting the engine. Press and hold the trip reset button on the dashboard. Continue holding the button while turning the ignition to the "OFF" position, then back to "ON." After a few seconds, the service light should reset.
The recommended oil type for a 2021 Citroën Berlingo Van is typically a 5W-30 fully synthetic oil that meets ACEA C2 specifications. Always consult your owner's manual for the exact specifications.
To connect your smartphone, ensure Bluetooth is enabled on your device. On the Berlingo's infotainment system, go to the Bluetooth menu and select "Pair Device." Follow the on-screen instructions to complete the pairing process.
If the engine overheats, pull over safely and turn off the engine. Allow it to cool before checking the coolant level. Refill if necessary, and inspect for leaks or damaged hoses. Avoid driving until the issue is resolved.
The air filter should typically be replaced every 20,000 kilometers or 12,000 miles, or as specified in the vehicle's maintenance schedule. Check it more frequently if you drive in dusty conditions.
The recommended tire pressure for the 2021 Citroën Berlingo Van is usually around 2.3 bar (33 psi) for the front tires and 2.5 bar (36 psi) for the rear tires. Always refer to the sticker on the driver's door sill for the exact values.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid excessive idling, and drive at moderate speeds. Removing unnecessary weight and using cruise control on highways can also help.
Use an ethylene glycol-based coolant that meets the manufacturer's specifications. It's typically recommended to use a pre-mixed solution for optimal performance. Consult the owner's manual for specific requirements.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the protective cap, disconnect the wiring harness, and unclip the old bulb. Insert the new bulb, reconnect the harness, and replace the cap.
If the key fob is not working, first check the battery and replace it if necessary. If the problem persists, try reprogramming the fob according to the instructions in the owner's manual or contact a Citroën dealer for assistance.