Citroën Berlingo 2013 Handbook
![Citroën Berlingo 2013 Van manual cover](/images/MdqEVhkeCDLIZWlNhdmvDvVj/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to the ON position without starting the engine. Press and hold the trip reset button on the dashboard. Keep it pressed while turning the ignition to the OFF position, then back to ON. Continue holding the button until the display counts down from 10 to 0 and the service light resets.
The recommended oil type for the Citroën Berlingo 2013 Van is typically 5W-30 fully synthetic oil. Always check your owner's manual or consult with a professional to ensure compatibility.
If your Berlingo is having starting issues, check the battery connections for corrosion or looseness. Ensure the battery is charged. Check the fuel level and ensure the fuel pump is operational. If the problem persists, consider having the starter motor or ignition system inspected by a professional.
To replace the air filter, open the hood and locate the air filter housing. Unclip or unscrew the cover, remove the old air filter, and clean any debris from the housing. Insert the new air filter, ensuring it fits snugly, and reattach the cover securely.
Common causes of overheating include low coolant levels, a faulty thermostat, a clogged radiator, or a failing water pump. Check coolant levels regularly and inspect for leaks. If overheating issues persist, have the cooling system inspected by a professional.
To check the brake fluid level, locate the brake fluid reservoir in the engine bay. Ensure the vehicle is on a level surface. The fluid level should be between the "MIN" and "MAX" marks on the reservoir. If low, top up with the recommended brake fluid type.
If the ESC light remains on, it could indicate a malfunction in the system. Try restarting the vehicle. If the light stays on, inspect the vehicle for any obvious issues such as wheel speed sensor problems and consult a professional for a diagnostic check.
It's recommended to replace the timing belt every 60,000 to 100,000 miles, depending on driving conditions and maintenance history. Refer to your owner's manual for specific intervals and have it inspected regularly by a professional.
The recommended tire pressures for the Citroën Berlingo 2013 typically range from 36 PSI for the front tires to 38 PSI for the rear tires, depending on load. Always check the sticker on the driver's door frame for precise specifications.
To pair your phone, turn on the vehicle's ignition and enable Bluetooth on your phone. Access the Bluetooth settings on the vehicle's infotainment system, search for devices, and select your phone. Confirm the pairing code on both devices to establish a connection.