Charnwood Aire 5 Low Stand Parts List

To install the Charnwood Aire 5, ensure you have the correct flue size and type, position the stove on a non-combustible hearth, and maintain the required clearances from combustible materials as per the manual. It is recommended to have a professional carry out the installation.
The Charnwood Aire 5 is designed to burn seasoned hardwood logs with a moisture content of less than 20%. Using the correct fuel helps in achieving optimal efficiency and prolonging the life of the stove.
Check for blockages in the flue, ensure the chimney is the correct height, and verify that there is no negative air pressure in the room. Also, inspect the seals on the doors and replace them if necessary.
Regularly clean the glass, check the seals, and remove any ash build-up. Annually, have a professional inspect and clean the chimney and flue to ensure safe operation.
Use a soft cloth and a stove glass cleaner or a mixture of vinegar and water. Avoid using abrasive materials that could scratch the glass. Ensure the stove is cool before cleaning.
Check that the air vents are open, the fuel is dry and seasoned, and that the stove has been properly installed. Also, ensure the chimney and flue are clean and unobstructed.
The Charnwood Aire 5 is primarily designed for wood burning. Using coal or other non-recommended fuels can damage the stove and void the warranty.
Ensure the chimney is drawing properly before opening the door. Open the air controls fully a few minutes before opening the door to increase draft. Always open the door slowly to prevent smoke spillage.
Use dry, seasoned wood, maintain a clean flue and chimney, and regularly check door seals and air inlets. Proper installation and regular maintenance can significantly enhance efficiency.
Always use the stove on a non-combustible hearth, keep flammable materials away, and ensure proper ventilation. Install a carbon monoxide detector in the room where the stove is used.