CFMOTO 650 ADVentura CF650-3US 2023 Owner's Manual
![CFMOTO 650 ADVentura CF650-3US 2023 Motorcycle manual cover](/images/vHQdDvZjeZphLRprOlrthjtF/thumbs/thumb175x175.webp)
The recommended tire pressure for the CFMOTO 650 ADVentura CF650-3US is typically 36 PSI for the front tire and 42 PSI for the rear tire. Always refer to the owner's manual for specific guidance.
To perform an oil change, warm up the engine, then turn it off and place the bike on a level surface. Remove the oil drain plug and filter, allowing oil to fully drain. Replace the drain plug and filter, then refill with the recommended oil type and quantity specified in the manual.
CFMOTO recommends using a high-quality 10W-40 synthetic motorcycle oil for optimal performance and protection. Always check the owner’s manual for any updates or specific brand recommendations.
To adjust the chain tension, place the motorcycle on a paddock stand. Loosen the axle nut, then adjust the chain tensioner bolts on either side to achieve the correct slack (usually around 30-40mm). Tighten the axle nut and recheck the tension.
Regular maintenance should be performed every 3,000 miles or 6 months, whichever comes first. This includes oil changes, chain lubrication, brake inspection, and a general check of all critical components. Refer to the owner's manual for a detailed schedule.
If the motorcycle is having trouble starting, check the battery charge, inspect the spark plugs, and ensure the fuel is fresh. Make sure the kill switch is in the 'run' position and that the side stand is up when starting in gear.
If the engine overheats, stop the motorcycle and allow it to cool down. Check the coolant level and inspect for any leaks. Ensure that the radiator is not blocked. If the problem persists, consult a professional mechanic.
To improve fuel efficiency, maintain proper tire pressure, ensure regular maintenance, and avoid aggressive acceleration and high speeds. Using recommended fuel grades also helps in maintaining efficient fuel consumption.
For winter storage, clean the motorcycle thoroughly, change the oil, and fill the fuel tank with a stabilizer. Remove the battery and keep it on a trickle charger, and cover the bike to protect it from dust and moisture.
To replace the headlight bulb, first disconnect the battery. Remove the headlight housing screws, then gently remove the housing. Disconnect the bulb connector, remove the old bulb, and replace it with a new one, ensuring not to touch the glass with bare fingers. Reassemble in the reverse order.