Carrier 48FCG 04 06 Installation Instructions

Routine maintenance for the Carrier 48FCG 04 06 should be conducted bi-annually. Filters should be checked and replaced as needed every 3-6 months, and coils should be cleaned at least once a year.
Check if the thermostat is set correctly. Ensure filters are clean and not blocked. Verify if the condenser coils are clean and the outdoor unit is free of debris.
Inspect for loose panels or components. Check the fan blades for obstructions and ensure that the motor bearings are properly lubricated.
Ensure regular maintenance is performed, including cleaning filters and coils. Seal any duct leaks and consider upgrading to a programmable thermostat.
Check the power supply and ensure the circuit breaker has not tripped. Verify the thermostat settings and inspect for blown fuses.
Turn off the unit at the thermostat, then switch off the power supply at the circuit breaker for at least 30 seconds before turning it back on.
Disconnect power to the unit, remove debris manually, and gently clean the coils using a garden hose with a spray nozzle. Avoid using high pressure.
Air filters should be checked monthly and replaced every 3-6 months, or more frequently if the unit is used heavily or in dusty environments.
Freezing can be caused by low refrigerant levels, restricted airflow due to dirty filters, or blocked evaporator coils.
Look for oily residue around fittings and connections. Use a leak detection device or liquid to identify leaks. It's advisable to contact a professional technician for precise detection and repair.