Caple WF1551 Instruction Manual
![Caple WF1551 Wine Cabinet manual cover](/images/bsdshUnGkQWxijvXIXFROczs/thumbs/thumb175x175.webp)
To adjust the temperature, use the touch control panel located on the front of the cabinet. Press the "up" or "down" arrow buttons to set your desired temperature. The display will show the current set temperature.
First, check if the cabinet is positioned in a well-ventilated area and not exposed to direct sunlight or heat sources. Ensure that the door is properly sealed. If the problem persists, inspect the air filters for dust and clean them if necessary.
Unplug the wine cabinet and remove all bottles. Use a soft cloth and a mixture of mild soap and water to clean the interior surfaces. Avoid abrasive cleaners. Dry thoroughly before reconnecting to power.
The ideal humidity level for wine storage is between 50% and 80%. The WF1551 is designed to maintain optimal humidity levels, but you can also use a hygrometer to monitor it.
To replace the light bulb, ensure the cabinet is unplugged. Locate the light cover inside the cabinet, remove it, and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the unit back in.
Unusual noises can be caused by an uneven surface. Ensure that the cabinet is level and stable. Also, check for any items inside that may be vibrating against the sides or shelves.
Yes, other beverages can be stored in the wine cabinet, but be mindful of the set temperature, as it is optimized for wine preservation. Adjust the temperature accordingly if storing different types of drinks.
The WF1551 is equipped with an automatic defrost feature. If manual defrosting is needed, unplug the cabinet, remove all items, and allow the ice to melt naturally. Clean any water residue before restarting the unit.
Regular maintenance includes cleaning the exterior and interior, checking and cleaning air filters, and ensuring the door seals are intact. Inspect the power cord for damage and ensure the cabinet is level.
To lock the controls, press and hold the lock button on the control panel for a few seconds until the lock icon appears on the display. This prevents any changes to the settings until unlocked.