AF area selection/ Multi-function button
Shooting Operation Nomenclature
A Live View Shooting
k Shooting Movies
o Drive Mode
A Mode
d/s/f/a/F Modes
D Using the Built-in Flash
d: Program AE
f: Aperture-priority AE
a: Manual Exposure
d/s/f/a Modes o Press the button to raise the built-in flash, then shoot.
A Mode o If necessary, the built-in flash will be fired automatically in low-light or backlit conditions.
LCD Panel
Viewfinder Information
All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest.
You can change the camera settings as desired to shoot in various ways. * Set the switch to the left (Multi
function lock released).
o Set the Mode Dial to . o When focus is achieved, the camera automatically sets the shutter speed and aperture as in the
mode.
s: Shutter-priority AE o Set the Mode Dial to . o Turn the <6> dial to set the desired shutter speed, then focus on the subject.
X The aperture will be set automatically. o If the aperture display blinks, turn the <6> dial until it stops blinking.
o Set the lenss focus mode switch to .
o Press the button, then turn the <6> dial.
X (One-Shot AF): For still subjects
9 (AI Focus AF): Switches the AF operation automatically
Z (AI Servo AF): For moving subjects
o Press the button, then turn the <6> dial.
o ISO 100 to ISO 16000 can be set in 1/3-stop increments.
o When A is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed.
o Set the switch to
. o Press the <0> button, and the image will appear on the LCD monitor.
o Press the shutter button halfway to focus, then press it completely to take the picture.
o Press the <0> button to exit the Live View shooting.
o Set the switch to . X The image will appear on the LCD monitor.
o Look through the viewfinder and press the button.
o Use the
or button.
X Each time you operate it, the AF area selection mode changes. o Press the shutter button
halfway to focus. o Press the <0> button to start shooting a movie.
o To stop movie shooting, press the <0> button again.
o To shoot still photos, press the shutter button completely.
o Movie shooting modes
: Autoexposure shooting : Shutter-priority AE shooting : Aperture-priority AE shooting
: Manual exposure shooting
o Press the button, then look through the viewfinder.
o The AF point selection will change in the direction you tilt the <9>. If you press <9> straight down, the center AF point (or center zone) will be selected.
o The <6> dial selects an AF point in the horizontal direction, and the <5> dial selects an AF point in the vertical direction (toggles among zones in Zone AF).
o Press the button, then turn the <5> dial.
u : Single shooting o : High-speed continuous shooting i : Low-speed continuous shooting B : Silent single shooting M : Silent continuous shooting Q : 10-sec. self-timer/ remote control k : 2-sec. self-timer/ remote control
o Set the Mode Dial to . o Turn the <6> dial to set the desired aperture, then focus on the subject.
X The shutter speed will be set automatically. o If the shutter speed display blinks, turn the <6> dial until it stops blinking.
o Set the Mode Dial to
. o Turn the <6> dial to set the desired shutter speed.
o Turn the <5> dial to set the desired aperture.
o Focus on the subject and check the exposure level indicator.
o Number of Possible Shots (Live View Shooting) Temperature No Flash 50% Flash Use
At 23C / 73F Approx. 270 shots Approx. 250 shots
Microphone
Recording movie
Flash exposure compensation/ ISO speed setting button
Mode Dial
Focus mode switch
AF Area selection lever
AF start button
AE lock button
Live View shooting/ Movie shooting switch <0> Start/ Stop button
<9> Multi-controller
Access lampMulti function lock switch
AF point selection button
<5> Quick Control Dial
<0> Setting button
Power switch
Flash button
Mode Dial lock- release button
Drive mode selection/ AF operation/AF method selection button
<6> Main Dial
Shutter button
Shutter speed
White balance
Exposure level indicator (Setting value)
ISO speed
Aperture
Electronic level
Battery check
Grid
AE lock Flash-ready
Flash exposure compensation
Shutter speed
Possible shots
Metering mode
AF operation
Battery check
OK Not good
Drive mode
Area AF frame Exposure level indicator (Metering/Flash metering)
AF points
Focus indicator
Aperture
Maximum burst
ISO speed Exposure level indicator (Setting value)
White balance selection/ Metering mode selection button
i: ISO SpeedN f: AF OperationN
en
en