Candy CCE 16 X User Instructions
![Candy CCE 16 X manual cover](/images/DqgmvyJJRQsKeQcsVgGyKKuO/thumbs/thumb175x175.webp)
To install the Candy CCE 16 X Hood, first ensure the power is off. Mount the hood using the provided brackets and screws, ensuring it is securely attached to the wall. Connect the ductwork and power supply per the installation manual.
To clean the filters, remove them from the hood and wash with warm soapy water or place them in the dishwasher. Ensure they are completely dry before reinserting them into the hood.
Check if the filters are clean and the ductwork is not blocked. Ensure the hood is correctly set to the appropriate extraction speed. If problems persist, consult the user manual or contact customer support.
To change the light bulb, first disconnect the hood from the power supply. Remove the light cover and replace the bulb with one of the same type and wattage. Reattach the cover and reconnect the power.
Regular maintenance includes cleaning the filters every 3-4 weeks, checking and cleaning the fan blades, and inspecting the ductwork for obstructions.
Unusual noises may be due to loose components or debris in the fan. Ensure all screws are tight and inspect the fan for any obstructions. Consult a technician if noise persists.
Yes, the Candy CCE 16 X Hood can be used in recirculating mode. This requires additional charcoal filters to effectively filter odors and smoke before releasing air back into the kitchen.
If the controls are unresponsive, check the power supply and ensure the unit is properly plugged in. If the issue persists, try resetting the unit or contacting customer support for assistance.
Refer to the user manual for specific instructions on setting the timer. Typically, it involves pressing the timer button and adjusting the time settings using the control panel.
Some condensation can occur, especially in high humidity environments. Ensure the hood is operating at the correct extraction rate and check that the kitchen is well-ventilated to reduce condensation.