Candy CBG625N User Instructions
![Candy CBG625N manual cover](/images/dbEJmBuFNcNdGVoUKDAlTiKF/thumbs/thumb175x175.webp)
Ensure that the hood is mounted at a minimum height of 65 cm above the cooking surface. Follow the installation manual for precise steps, using the provided brackets and screws. Ensure all electrical connections are done safely.
Check if the filters are clean and not clogged. Ensure the ductwork is not obstructed. Verify the fan speed settings and ensure the hood is set to the correct extraction mode.
The filters should be cleaned every 2-3 months depending on usage. If you cook frequently, consider cleaning them monthly to ensure optimal performance.
Yes, the hood can be used in recirculation mode by installing the carbon filters, which help to neutralize odors before the air is recirculated back into the kitchen.
First, disconnect the power supply. Remove the grease filters to access the bulb area. Replace the bulb with a compatible LED or halogen bulb as specified in the manual, then reassemble.
A rattling noise can occur if the hood is not securely mounted or if there are loose components. Check the installation and ensure all screws and filters are tightly secured.
Press and hold the filter reset button for a few seconds until the indicator light turns off. This procedure may vary slightly, so refer to the manual for specific instructions.
Regularly clean the filters, check for any blockages in the ductwork, and ensure the fan blades are free from grease build-up. Inspect the hood for any signs of wear and tear.
Yes, a slight delay can be normal as the fan speed gradually increases to the set level. If the delay is excessive, consult the troubleshooting section of the manual.
Use the hood at lower fan speeds when high power is not necessary, and turn off the hood shortly after cooking. Regular maintenance also ensures efficient operation.