Bush F621QB Installation and User Instructions
![Bush F621QB Washing Machine manual cover](/images/gaTWXIeYpNKdsAmpydnELZmK/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry and detergent. Then, select the desired wash program using the program dial, adjust any additional settings, and press the start/pause button to begin the cycle.
Check to ensure that the drain hose is not kinked or clogged. Also, inspect the drain filter for any obstructions and clean it if necessary. Make sure the drain hose is positioned correctly at the recommended height.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residues. Use a soft brush if needed to clean stubborn residues.
Ensure the washing machine is level by adjusting its feet. Make sure the load is evenly distributed inside the drum. Avoid overloading the machine, as this can cause excessive vibration.
It is recommended to clean the lint filter after every wash cycle to ensure optimal performance and to prevent any blockages.
Ensure the washing machine is plugged in and the power is on. Check if the door is closed properly, as the machine will not start if the door is open. Also, verify that the water supply is turned on.
Run an empty wash cycle with hot water and a cup of white vinegar or a washing machine cleaner to eliminate odors. Regularly leave the door open after washes to allow the drum to dry.
Error code E3 typically indicates an unbalanced load. Stop the machine, redistribute the laundry more evenly, and restart the cycle.
Regularly clean the door seal and detergent drawer, run hot wash cycles with a cleaner, and keep the door and drawer open between cycles to allow air circulation.
Routinely check and clean the lint filter, detergent drawer, and drum. Inspect hoses for leaks or damage, and ensure the machine is level. Run maintenance washes periodically to keep the machine clean.