Bush BMFPROGSS 4248349 Installation and User Instructions
![Bush BMFPROGSS 4248349 Oven manual cover](/images/CMTZpfFXfdBQNaQtSZQXaSNj/thumbs/thumb175x175.webp)
To set the clock, press the 'Clock' button until the display starts flashing. Use the '+' and '-' buttons to set the correct time, then press 'Clock' again to confirm.
If your oven is not heating properly, check if it's correctly plugged in and that the circuit breaker is not tripped. Ensure the temperature settings are correct and inspect the heating elements for any damage. If the issue persists, contact customer support.
To clean the interior, remove all racks and wipe down the surfaces with a mixture of warm water and mild detergent. For stubborn stains, use a baking soda paste or an oven-specific cleaner. Avoid using abrasive materials that might damage the surface.
Yes, you can use aluminum foil in your oven, but it should not block any vents or cover the oven floor, as this can affect air circulation and cooking performance.
To perform a factory reset, press and hold the 'Reset' button for about 10 seconds until the display turns off and then back on, restoring default settings.
Noise from the oven fan could be due to debris caught in the fan blades or a loose fan blade. Turn off the oven and check the fan area for any obstructions. If the noise continues, consult a technician.
To replace the interior light bulb, ensure the oven is off and cool. Remove the glass cover by turning it counterclockwise, replace the bulb with a new one of the same type, and screw the cover back on.
Check for any obstructions around the door seal and ensure the hinges are aligned properly. If the door still does not close, the hinges might need adjustment or replacement by a professional.
For even cooking, preheat the oven before placing food inside, avoid overcrowding, and rotate trays midway through cooking if necessary. Use the correct rack position as per the recipe guidelines.
Error code 'E3' typically indicates a temperature sensor issue. Ensure the sensor is connected properly. If the error persists, the sensor may need to be replaced. Contact customer support for assistance.