Buick Envision 2023 Getting To Know Your Manual
![Buick Envision 2023 manual cover](/images/XjnwzXhjvqxkKEepanpfUrim/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, inflate all tires to the recommended pressure. Then, turn on the ignition without starting the engine. Press and hold the TPMS reset button until the light blinks three times, then release it. Drive the vehicle for 20 minutes to complete the reset.
The 2023 Buick Envision typically requires SAE 5W-30 synthetic oil. However, always refer to your owner's manual for the manufacturer's recommendation.
To connect your smartphone, use Bluetooth by turning on your phone's Bluetooth and selecting "Buick Envision" from the available devices list. Alternatively, use a USB cable to connect your phone directly to the infotainment system for Apple CarPlay or Android Auto.
If the check engine light illuminates, ensure the gas cap is tightly secured. If the light remains on, have the vehicle diagnosed by a professional technician to identify any potential issues.
To change the cabin air filter, open the glove box and remove the limiting arm. Press in on the sides of the glove box to lower it completely. Remove the filter cover, then replace the old filter with a new one. Reassemble in reverse order.
To jump-start your vehicle, connect the positive jumper cable to the positive terminal on your battery and the other end to the positive terminal of the donor battery. Connect the negative cable to the donor battery's negative terminal, and the other end to an unpainted metal surface on your vehicle. Start the donor car, then start your Buick Envision.
To use the hands-free liftgate, ensure you have the key fob within range. Then, perform a kicking motion under the rear bumper where the sensor is located. The liftgate will open or close automatically.
Routine maintenance is recommended every 7,500 miles or every 12 months, whichever comes first. This includes oil changes, tire rotations, and brake inspections. Refer to your owner's manual for a detailed maintenance schedule.
To use adaptive cruise control, press the cruise control button on the steering wheel, then accelerate to your desired speed and press the set button. Adjust the following gap by pressing the gap control button. The system will maintain speed and adjust for traffic ahead.
Common reasons for battery drain include leaving lights on, an accessory plugged into the power outlet, or a faulty electrical component. Ensure devices are unplugged and lights are off when the vehicle is not in use.