Buick Enclave 2014 Getting To Know Your Manual
![Buick Enclave 2014 manual cover](/images/plbFshHBtOxuOQDPaCTvnnaQ/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Use the DIC controls on the steering wheel to navigate to the "Oil Life" menu. Press and hold the "SET/CLR" button until the display shows 100%.
The recommended engine oil for a 2014 Buick Enclave is SAE 5W-30 full synthetic oil that meets GM standard GM6094M.
To pair your phone, ensure Bluetooth is enabled on your phone. Press the "Phone" button on the Enclave's infotainment system. Select "Pair Device" and follow the prompts on both the vehicle's display and your phone to complete the pairing process.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or misfiring engine. It is advisable to use an OBD-II scanner to retrieve diagnostic trouble codes or visit a qualified mechanic for a thorough inspection.
The recommended tire pressure for a 2014 Buick Enclave is typically 35 PSI for both front and rear tires. It's important to check the tire information placard located on the driver's side door jamb for specific details.
To replace the cabin air filter, open the glove box and remove the limiting arm. Push in both sides of the glove box to release it from its stops. The cabin air filter is located behind a cover that you can remove by unclipping the latches. Replace the old filter with a new one, ensuring the airflow arrows align correctly.
If the battery keeps dying, check for any lights or accessories left on that may drain the battery. Inspect the battery terminals for corrosion and ensure they are tightly connected. It may also be necessary to test the battery and alternator for proper function.
To use remote start, press the lock button on the key fob twice, then press and hold the remote start button until the turn signals flash. This indicates the engine has started. The vehicle will run for about 10 minutes before shutting off automatically if no action is taken.
A grinding noise when turning could be caused by worn CV joints, damaged wheel bearings, or issues with the power steering system. It is recommended to have a professional mechanic inspect the vehicle to determine the exact cause.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and avoid aggressive driving behaviors. Additionally, reducing excess weight and minimizing idling can help enhance fuel economy.